BJ-Ⅰ崩解时限仪
崩解时限仪是根据《中国药典》对片剂、胶囊剂、及丸剂进行崩解时限检测的药检仪器。
技术指标:
温度预制范围：室温～50℃,显示显示分辨率为0.1℃。
温度控制精度：±0.3℃
定时预制范围：1min～900min
时间控制精度：±0.5min
工作噪声：＜60db
升降吊篮数量：1套
吊篮升降频率：（30～31）次/分
吊篮升降距离：（55±1）mm
筛网至杯底最小间距：25mm±2mm
筛网孔径：标配2mm、（0.425mm、1mm孔径可选定）
电 源：220V50Hz
整机功率：600W
外形尺寸：长*宽*高 260mm*300mm*440mm
主要特点:
①1套吊篮。
②仪器自动控制水浴温度为37.0℃（药典规定）。高精度数字电子传感器，无需校准即可保证水浴温度的高精度和高准确度。
③仪器自动设定吊篮升降时间为15分钟，也可任意重新设定。
④采用单片机为核心的计算机控制技术，智能化控制水浴温度、工作时间两个性能参数。
⑤仪器具有监控水浴温度过热报警和自动保护功能。
本仪器支持出口定制。
程序可选：中文程序、英文程序
电源电压可选;110V 220V 50HZ 60HZ
BJ-I Disintegration Time Limit Tester
Disintegration time limit tester is a drug test instrument to test the disintegration time limit of tablets, capsules and pills in accordance with Chinese Pharmacopoeia.
Technical indexes:
△ Temperature prefabrication range: room temperature:～50℃, display resolution:0.1℃.
△ Temperature control accuracy: ±0.3℃
△ Timing prefabrication range: 1min～900min
△ Time control accuracy: ±0.5min
△ Work noise: ＜60db
△ Number of lifting baskets: 1 set
△ Lifting frequency of basket: (30～31) times/min.
△ Lifting distance of basket: (55±1) mm
△ Minimum spacing from screen to beaker bottom: 25mm±2mm
△ Mesh size: standard configuration 2mm, (optional for 0.425mm and 1mm bore diameters)
△ Power supply：220V50Hz
△ Total power：600W
△ Overall dimensions：L*W*H 260mm*300mm*440mm
Main features:
① 1 set of basket.
② The instrument controls the bath temperature at 37.0℃ automatically (prescribed by Pharmacopeia). High-precision digital electronic sensor is adopted to ensure the high precision and high accuracy of water bath temperature without the need for calibration.
③ The instrument sets the lifting time of baskets to be 15min automatically, which can also be reset at any time.
④ It adopts the computer control technology which is centered on SCM to control two performance parameters including bath temperature and working time intelligently.
⑤ The instrument can monitor bath temperature, give over-temperature alarm and protect itself automatically.
